Yay, looks like I got the archives working:
https://lists.balug.org/mailman3/hyperkitty/list/balug-test3@lists.balug.or…
On Fri, Jul 5, 2024 at 2:53 PM Michael Paoli <michael.paoli(a)berkeley.edu> wrote:
>
> Well, I don't know that there's a whole lot to do quite at this point -
> notably as it's not yet fully stabilized and configured (most notably
> still have to get hyperkitty/archiving working properly, then there's
> still quite a bit more testing to do), but if you note anything amiss
> ... particularly if consistently so, may want to point it out.
>
> I'm thinking/hoping that the other pieces of Mailman3 are at least
> meta-stable at this point.
>
> On Fri, Jul 5, 2024 at 10:39 AM <aaronco36(a)sdf.org> wrote:
> >
> > Hi,
> > Thanks for the ongoing status of the Mailman3 testing.
> > Here's hoping that the Mailman 2 --> Mailman 3 migrations continue to
> > proceed successfully and smoothly :-)
> > Further workable/practical/realistic ways to help out in the migration(s),
> > other than _not_ being a potential prodding nuisance about it ?
> > -A
> >
> > > ----------------------------------------------------------------------
> > >
> > > Message: 1
> > > Date: Thu, 4 Jul 2024 19:34:08 -0700
> > > From: Michael Paoli <michael.paoli(a)berkeley.edu>
> > > To: BALUG-test <balug-test(a)lists.balug.org>
> > > Subject: Re: [BALUG-Test] Mailman3 testing
> > > Message-ID:
> > > <CAPU_E+ds6dcKZm8rUU_gw8R9OEh5FP-7pMCRKtYhthvoJK3JgQ(a)mail.gmail.com>
> > > Content-Type: text/plain; charset="UTF-8"
> > >
> > > Still far from even being completely set up,
> > > let alone well tested, and
> > > Mailman 2 --> Mailman 3 migrations.
> > >
> > > But a bit further along, most notably:
> > > https://lists.balug.org/mailman3/
> > > So, at least some of the web stuff is working properly,
> > > but much of it still has to be properly configured,
> > > tested, etc.
> > >
> > > On Wed, Jun 19, 2024 at 9:55?PM Michael Paoli
> > > <michael.paoli(a)berkeley.edu> wrote:
> > >>
> > >> Have some very preliminary Mailman version 3 testing started on
> > >> the BALUG VM, notably for lists.balug.org
> > >> General plan (at least shorter term) is to replace the existing
> > >> soon to be unsupported Mailman 2 with Mailman 3.
> > >>
> > >> So, testing on Mailman3 - presently have one list set up:
> > >> balug-test3(a)lists.balug.org
> > >> Note that it might possibly wink in and out of existence,
> > >> and/or get reloaded, etc., but general intent is for it
> > >> to mostly persist and have continuity through testing,
> > >> And around/after completion of Mailman 2 to Mailman 3
> > >> migration, will probably fold it into existing
> > >> balug-test(a)lists.balug.org list (which will then be Mailman 3).
> > >>
> > >> At the moment, so far (probably) just email interface,
> > >> with other bits to come.
> > >>
> > >> So, subscribe, unsubscribe, etc.
> > >> balug-test3-subscribe(a)lists.balug.org
> > >> balug-test3-unsubscribe(a)lists.balug.org
> > >> balug-test3-request(a)lists.balug.org
> > >>
> > >> Note due to some limitations in how the MTA is
> > >> configured with anti-spam, it will generally
> > >> filter/reject/drop messages with empty bodies (presumed to be spam),
> > >> so, to work around that, don't have an empty body.
> > >> E.g. -request address, to send a command of help,
> > >> put it in the body, or if in the subject, include a body of:
> > >> end
> > >> so it makes it past the anti-spam and gets properly processed.
> > >> The existing Mailman 2 configuration has these MTA anti-spam
> > >> configuration
> > >> limitations noted on the relevant web pages, and the relevant help text,
> > >> etc.
> > >> ... but I haven't yet done any such customization on Mailman3.
Well, I don't know that there's a whole lot to do quite at this point -
notably as it's not yet fully stabilized and configured (most notably
still have to get hyperkitty/archiving working properly, then there's
still quite a bit more testing to do), but if you note anything amiss
... particularly if consistently so, may want to point it out.
I'm thinking/hoping that the other pieces of Mailman3 are at least
meta-stable at this point.
On Fri, Jul 5, 2024 at 10:39 AM <aaronco36(a)sdf.org> wrote:
>
> Hi,
> Thanks for the ongoing status of the Mailman3 testing.
> Here's hoping that the Mailman 2 --> Mailman 3 migrations continue to
> proceed successfully and smoothly :-)
> Further workable/practical/realistic ways to help out in the migration(s),
> other than _not_ being a potential prodding nuisance about it ?
> -A
>
> > ----------------------------------------------------------------------
> >
> > Message: 1
> > Date: Thu, 4 Jul 2024 19:34:08 -0700
> > From: Michael Paoli <michael.paoli(a)berkeley.edu>
> > To: BALUG-test <balug-test(a)lists.balug.org>
> > Subject: Re: [BALUG-Test] Mailman3 testing
> > Message-ID:
> > <CAPU_E+ds6dcKZm8rUU_gw8R9OEh5FP-7pMCRKtYhthvoJK3JgQ(a)mail.gmail.com>
> > Content-Type: text/plain; charset="UTF-8"
> >
> > Still far from even being completely set up,
> > let alone well tested, and
> > Mailman 2 --> Mailman 3 migrations.
> >
> > But a bit further along, most notably:
> > https://lists.balug.org/mailman3/
> > So, at least some of the web stuff is working properly,
> > but much of it still has to be properly configured,
> > tested, etc.
> >
> > On Wed, Jun 19, 2024 at 9:55?PM Michael Paoli
> > <michael.paoli(a)berkeley.edu> wrote:
> >>
> >> Have some very preliminary Mailman version 3 testing started on
> >> the BALUG VM, notably for lists.balug.org
> >> General plan (at least shorter term) is to replace the existing
> >> soon to be unsupported Mailman 2 with Mailman 3.
> >>
> >> So, testing on Mailman3 - presently have one list set up:
> >> balug-test3(a)lists.balug.org
> >> Note that it might possibly wink in and out of existence,
> >> and/or get reloaded, etc., but general intent is for it
> >> to mostly persist and have continuity through testing,
> >> And around/after completion of Mailman 2 to Mailman 3
> >> migration, will probably fold it into existing
> >> balug-test(a)lists.balug.org list (which will then be Mailman 3).
> >>
> >> At the moment, so far (probably) just email interface,
> >> with other bits to come.
> >>
> >> So, subscribe, unsubscribe, etc.
> >> balug-test3-subscribe(a)lists.balug.org
> >> balug-test3-unsubscribe(a)lists.balug.org
> >> balug-test3-request(a)lists.balug.org
> >>
> >> Note due to some limitations in how the MTA is
> >> configured with anti-spam, it will generally
> >> filter/reject/drop messages with empty bodies (presumed to be spam),
> >> so, to work around that, don't have an empty body.
> >> E.g. -request address, to send a command of help,
> >> put it in the body, or if in the subject, include a body of:
> >> end
> >> so it makes it past the anti-spam and gets properly processed.
> >> The existing Mailman 2 configuration has these MTA anti-spam
> >> configuration
> >> limitations noted on the relevant web pages, and the relevant help text,
> >> etc.
> >> ... but I haven't yet done any such customization on Mailman3.